Xylem Lab 970 - Manual (Page 8)

Overview Lab 970
8 ba75558e03 11/2009
1.1 Keypad
In this operating manual, keys are indicated by brackets <..> .
The key symbol (e.g. <OK>) generally indicates a short keystroke
(under 2 sec) in this operating manual. A long keystroke (approx.
2 sec) is indicated by the underscore behind the key symbol (e.g.
<OK
_
>).
<On/Off>:
<On/Off
_
>:
Switch the meter on/off
Resetting the determined cell constant
<MODE>:
<MODE
_
>:
Select measured parameter
Open setting menu for calibration and
measurement
<CAL>:
<CAL
_
>:
Call up calibration procedure
Call up calibration data
<SC>:
<SC
_
>:
Activate / deactivate stability control
Set the interval for data transmission
<
▲>: Increment
values, scroll
<
▼>: Decrement
values, scroll
<OK>:
<OK
_
>:
Confirm entries
Open setting menu for system settings
MODE SC CAL
MODE
CAL
SC