Xylem CG 853 User Manual
Page 44
Operation
118
Note
The
AutoStore
function is interrupted if you perform other
functions, e.g. output data storage.
After completing the other function, the
AutoStore
function
continues. However, as a result, gaps can occur in the
recording of the measured values.
Switching off the
AutoStore
Switch off the
AutoStore
function by:
l
Setting the storage interval (Int 1) to OFF or
l
Switch the conductivity meter off and on again.
4.4.3 Outputting the data storage
The contents of the data storage can be output to the:
l
display
l
interface
1 Press the <RCL> key repeatedly until
Sto disp
ap-
pears on the display.
2 Press the <run/enter> key.
A measured value appears on the display.
The I. D. number of the data record appears for ap-
prox. 2 s.
Outputting to the
display