Xylem CG 853 - Manual (Page 60)

Operation
134
4.7 Reset
You can reset (initialize) measuring and configuration
parameters separately from one another.
Measuring
parameters
The following measuring parameters (Cond InI) are reset to
the values they had on delivery:
Note
When the measuring parameters are reset, the calibration
data are lost. After the parameters have been reset, cali-
brate!
Configuration
parameters
The following configuration parameters (InI) are reset to the
values they had on delivery:
Measuring mode
Cell constant 0.475 cm
-1
(calibrated)
0.475 cm
-1
(set up)
Temperature
compensation nLF
Reference temperature
Temperature coefficient of
the linear temperature
compensation 2.000 %/K
TDS factor 1.00
Baud rate 4800
Interval 1
(automatic storing)
OFF
Interval 2
(for data transmission)
OFF