Xylem handylab LF 12 - Manual (Page 45)

handylab LF 12 Operation
45 ba75367e04 01/2011
4.6 Configuration
You can adapt the measuring instrument to your individual requirements. To
do this, the following parameters can be changed (the status on delivery is
marked in bold):
Note
You can leave the configuration menu at any time with <M> . The parameters
that have already been changed are stored.
Baud rate
Baud rate 1200, 2400, 4800, 9600
Calibration interval (Int 3) 1 ... 180 ... 999 d
AutoRange ARng On or off
Reference temperature – 25 °C (TREF25)
– 20 °C (TREF20)
Display of the measured value
as conductivity or resistivity S/cm or M
Ω
Date/time Any
1 Switch off the measuring instrument.
2 Press the <M> key and hold it down.
3 Press the <ON/OFF> key.
The display test appears briefly on the display. The measuring
instrument then switches automatically to the setting of the
baud rate.
4 Select the required Baud rate with <V> <W>.
5 Confirm with <RUN/ENTER>. Int 3 appears on the display.
Day.Month No.
Time
1 2
M
m
% mg/l
cm
S/
cm
S
mbar
mV/pH
t n
Store Auto
LoBat
Tref25
nLF
/ K %
RCL
Sal
°
AR
TP
C
cm 1/
° F
ARng Cal Lin
Tref20
Sal TDS O UpH
AutoCal DIN
AutoCal TEC
Ident Year
0 0 8 4 Baud