YSI CR 3200 Thermoreactor - Manual (Page 8)

Safety CR 3200
8 ba76120e01 08/2012
2.1 Authorized use
The authorized use of the thermoreactor is exclusively the heating of
samples in cells in a laboratory. The technical specifications as given
in chapter 8 T
ECHNICAL D ATA must be observed. Only the operation and
running of the measuring instrument according to the instructions given
in this operating manual is authorized. Any other use is considered
unauthorized.
2.2 General safety instructions
This thermoreactor is constructed and tested in compliance with the EN
61010 safety regulations for electronic measuring instruments. It left
the factory in a safe and secure technical condition.
Function and operating
safety
The smooth functioning and operational safety of the thermoreactor
can only be guaranteed if the generally applicable safety measures and
the specific safety instructions in this operating manual are followed
during operation.
The smooth functioning and operational safety of the thermoreactor
can only be guaranteed under the environmental and electrical
operating conditions that are specified in chapter 8 T
ECHNICAL D ATA .
If the thermoreactor was transported from a cold environment to a
warm environment, the formation of condensate can impair the
functioning of the measuring system. In this event, wait until the
temperature of the thermoreactor reaches room temperature before
putting the thermoreactor back into operation.
Caution
The thermoreactor is only allowed to be opened by personnel au-
thorized by.