YSI CR 3200 Thermoreactor User Manual
Page 24
Advertising
Operation
CR 3200
24
ba76120e01
08/2012
Socket assignment
2
Connect the thermoreactor to the PC or printer. (Cable see
chapter 9 A
). To do so:
plug the reference plug (unmarked) in the "Ref" socket (1).
plug the signal plug (marked by a red ring) in the socket (2).
3
Start the terminal program on the PC.
4
Set the following transmission data in the terminal program:
Baud rate
4800
Handshake
none
Parity
none
Data bits
8
Stop bits
1
Record
none
5
Start the data transmission with g.
After the transmission is finished the test report is deleted in
the thermoreactor.
1 Ref
2 TxD
Advertising