YSI AmmoLyt Plus 700 IQ - Manual (Page 21)

AmmoLyt
®Plus
700 IQ Commissioning
3 - 9 ba76003e01 01/2012
3.5 Settings
3.5.1 General information
Automatic electrode
recognition
The AmmoLyt
®Plus
700 IQ software automatically recognizes the built-
in electrodes and checks the equipment for validity. If the sensor is
correctly equipped it is displayed in the list of sensors with the
designation, "AmmoLyt+".
Note
Manually, you can also have the potassium electrode displayed as the
extra sensor, AmmoLyt+K.
Carrying out settings With <S>, switch to the main settings menu from the measured value
display. Then navigate to the setting menu (setting table) of the sensor.
The exact procedure is described in the relevant IQ S
ENSOR N ET
system operating manual.
The setting tables for the AmmoLyt+ are described in the following
chapter.
Sensor overlapping
settings
Certain settings are sensor overlapping and can be made in any one of
the setting tables. The setting is used by all sensors.
The sensor overlapping settings are:
 Temperature mode (°C/°F)
 Temp. adjustment