YSI IQ SensorNet MIQ/R6 Module - Manual (Page 26)

Settings MIQ/R6
4 - 12 ba76031e01 01/2012
4.3 Linking the output with a sensor
Fig. 4-13 150 - Settings of outputs and links:Link with...
Note
Outputs that are linked with sensors can be identified in the Ser. no.
field of the Settings of outputs and links overview by the specification of
the linked sensor.
1 Open the Settings menu with
s
.
2 Using
d
and
g
, select and confirm the menu item, System
settings -> Settings of outputs and links.
The Settings of outputs and links display opens.
3 Highlight the & column with
d
and confirm with
g
.
4 Highlight an output with
d
and confirm with
g
. The Link
with... display opens.
The display shows a list of the sensors to which a link is
possible.
5 Select a sensor with
d
and confirm with
g
.
The output is linked with the sensor.