6 checking the status of outputs, Checking the status of outputs -28, Ee section 4.6 – YSI IQ SensorNet MIQ/R6 Module User Manual
Page 42
Settings
MIQ/R6
4 - 28
ba76031e01
01/2012
4.6
Checking the status of outputs
This function offers a simple overview of the states of all outputs of a
MIQ/R6.
For relays, the status open or closed is displayed.
The Status of output channels function is available in the Settings/
Service/List of all components menu.
Fig. 4-17 394 - Status of output channels
1
Call up the measured value display with
m
.
2
Open the Settings menu with
s
.
3
Highlight the Service menu item with
d
and confirm with
g
.
The Service dialog box opens.
4
Highlight the List of all components menu item with
d
and
confirm with
g
.
The List of all components dialog box opens.
5
Select the required component (column Model, entry MIQR6)
with
d
and confirm with
g
.
The 394 - Status of output channels window opens.
6
Using
m
or
e
, exit the 394 - Status of output channels
window.