YSI IQ SensorNet MIQ/R6 Module - Manual (Page 27)

MIQ/R6 Settings
4 - 13 ba76031e01 01/2012
4.4 Deleting a link with an output
If a link from a relay output with a sensor is no longer required, the link
can be deleted.
Fig. 4-14 150 - Settings of outputs and links:Erase link
1 Open the Settings menu with
s
.
2 Using
d
and
g
, select and confirm the menu item, System
settings -> Settings of outputs and links.
The Settings of outputs and links display opens.
3 Highlight the & column with
d
and confirm with
g
.
4 Highlight a linked output with
d
and confirm with
g
.
5 Select Erase link with
d
and confirm with
g
.
A security prompt appears.
6 Select Erase link with
d
and confirm with
g
.
The link is deleted.