YSI IQ S ENSOR N ET MIQ/CHV PLUS - Manual (Page 17)

MIQ/CHV PLUS Settings
4 - 1 ba76036e01 01/2012
4 Settings
The MIQ/CHV PLUS module has a valve output.
The MIQ/CHV PLUS valve module registers on the IQ S
ENSOR N ET
system as a valve output (V) and appears in the list of outputs.
On the terminal or Universal Transmitter, you can
 assign a name to the valve output (with the 2020 XT systems only,
see section 4.1).
 link the valve output to a sensor (see section 4.2)
 erase the link of the valve output with a sensor (see section 4.3)
 set the valve output (see section 4.4)
 check the state of the valve output (see section 4.5)
Note
The general operating principles are given in the system operating
manual or in the component operating manual of the terminal
components.
Functions for the valve
output
(see section 4.4)
You can set the following functions for the valve output:
 Cleaning
(Setting of the cleaning procedure in the menu, Settings of outputs
and links)
 Sensor-controlled
(Setting of the cleaning procedure in the menu, Settings of sensors
and diff. sensors of the relevant sensor)
 Manual control