YSI Pro30 - Manual (Page 7)

6 7
appropriate language then press enter to confirm (figure 5). If an incorrect
language is selected, it may be changed in the System Setup menu.
Figure 5, Select language.
After selecting a language, the Run screen will be displayed. The next time the
instrument is powered up, the Run screen will display immediately after the
splash screen.
S Y S T E M S E T U P M E N U
Press the menu key to access the System Setup menu. The System Setup
menu contains multiple screens that are notated as ‘pages’. The current page is
indicated near the bottom of the display (figure 6).
Use the up and down arrow keys to scroll through menu options and menu
pages.
EXITING THE SYSTEM SETUP MENU
To exit the System Setup menu, press the down arrow key until the ESC - Exit
box is highlighted, then press enter to return to the Run screen.
Select Language:
 English
 Français
 Español
 Deutsch
Use  to select
Language
Press  to confirm
Figure 6, page 1 of System Setup menu. Audio is enabled.
audIo
Audio can be enabled or disabled by using the up or down arrow keys to highlight
Audio and pressing enter. When enabled, there will be an ‘X’ in the box next to
Audio.
When Audio is enabled, the Pro30 will beep twice to indicate stability when
Auto Stable is enabled. The instrument will also beep when a key is pressed.
When Audio is disabled, the Pro30 will not beep.
contrast
To adjust the display Contrast, use the up or down arrow keys to highlight
Contrast, then press enter. Next, use the up or down arrow keys to adjust the
contrast. The up arrow key will darken the contrast and the down arrow key will
lighten the contrast. After adjusting the contrast, press enter to save and exit the
Contrast adjustment option.
EMERGENCY CoNTRAST ADJUSTMENT
If necessary, there is an alternate method of adjusting the contrast. To adjust the
contrast, press and hold the menu key, then press the up arrow key to darken the
contrast or press the down arrow key to lighten the contrast.