Xylem DH-21 - Manual (Page 97)

DH-21
Using the Graphical “W ATER LOG” Software 4-51
4.4.10 Sensor Information Option
You can see information about your “ W ATER LOG” sensor as shown in Figure 4-34. The Vendor,
Model Number, Firmware Version, Printed Circuit Board Serial Number, Serial Number, and
Product Revision number are available for technical support purposes.
Figure 4-34. Read Sensor Information Option
4.4.11 Diagnostics Option
The Diagnostics option as shown in Figure 4-35 performs several tests on the hardware of the
“
W
ATER LOG” sensor. This option is used to confirm that the sensor is working properly. The
sensor must be in the reset mode before this option can be selected.
Note: Time, Date, User Notes and ALL DATA will be overwritten during this test. Extract
any desired data before using this option.