Xylem FL16 WATER FLOW LOGGERS - Manual (Page 22)

Global Water
800-876-1172
• globalw.com
- 22 -
Action: The Action menu has two options, “Program Settings” and “Initialize to
Default Values”. Program settings will reprogram the data logger with all the setup
and calibration information and works the same as the Program Settings Button at
the bottom of the screen. Initialize
will restore all of the analog, digital
and general setup information fields
to default values. Only the setup
menus are changed, the data logger
must still be programmed with the
new default values. A warning message will appear before this action is taken.
Help: The Help menu provides access to the on-line help files and Global Water
contact information as described previously.
XV. General Setup:
In the General Setup menu, the logger name, sensor warm-up time, logging mode,
logging interval and alarm times are entered.
XXXXX
Name: The logger is a user definable name to identify the logger. Up to 32
characters are allowed however, a continuous string of characters of more than 16
with no spaces may not be displayed correctly. Click on the field to enter
information.