Xylem System 5000 User Manual - Manual (Page 15)

Hardware Overview
13
The height of the card is that of a normal
slot. Up to three Analog/Digital modules
can be installed into a base System
5000
™
unit if no other modules are
installed.
Installing the System 5000
™
option
modules is a quick and simple process.
After verifying power has been
disconnected from the unit, remove the
two screws holding the slot plate in place
and remove the plate. Insert the option
module into the opening, verifying the
card is secured within the guide rails
inside the System 5000
™
.
Press the card firmly into the System 5000
™
and replace the screws. Reconnect the
power. Once the unit has fully booted, the
new options will be available within the
appropriate menus (e.g. Select Input, Add
Output, etc), labeled according to the Slot
in which they were installed.
Installing Plug-in Option Modules
Analog / Digital Expansion Module