Xylem Oxi 3210 Dissolved oxygen (D.O.) meter - Manual (Page 25)

Oxi 3210 Operation
25 ba75795e02 03/2009
4.3.2 Data storage
This menu contains all functions to display, edit and erase stored
measured values.
Note
Detailed information on the storage functions of the Oxi 3210 is given
in section 4.5.
4.3.3 Automatic Stability control
The function, automatic Stability control (AutoRead) continually checks
the stability of the measurement signal. The stability has a considerable
impact on the reproducibility of measured values.
You can activate or switch off the automatic Stability control function
(see section 4.4.3).
The measured parameter flashes on the display
z as soon as the measured value is outside the stability range
z if you switch over between the measured parameters with <M>.
z if the automatic Stability control is switched off.
System /Reset - Resets the system settings to
the default values.
For details, see section 4.6.2
Menu item Setting Description