Extron Electronics DVI 201xi Tx User Guide - Manual (Page 21)

Specifications
Video
Maximum data rate ........................ 4.95 Gbps (1.65 Gbps per color)
Maximum pixel clock ...................... 165 MHz
Resolution range ............................ Up to 1920x1200 or 1080p @ 60 Hz
Formats .......................................... RGB and YCbCr digital video
Standards ....................................... DVI 1.0, HDMI 1.2
Video input and loop through— transmitter
Number/signal type ........................ 1 single link DVI-D* input
1 single link DVI-D* local loop-through
Connectors .................................... 2 female DVI-I (1 for input, 1 for loop-through)
NOTE: *Dual link DVI is backwards compatible with all single link DVI/HDMI signals.
Interconnection between transmitter and receiver
Connectors .................................... 2 female RJ-45 per unit for 2 cables connecting the transmitter and receiver
Termination standards .................... TIA/EIA T568A or T568B
Signal transmission distance
1920x1200 or 1080p @ 60 Hz
Extron DTP26 cable ........... Up to 150' (45 m)
CAT 5/5e/6 STP ................. Up to 125' (38 m)
CAT 5/5e/6 UTP ................. 100' (30 m)
Longer distances are possible with lower rates.
1024x768 or 720p/1080i @ 60 Hz
CAT 5/5e/6 UTP or STP or Extron DTP26
Up to 200' (60 m)
NOTE: The transmission distance varies greatly depending on the signal resolution and on the type of cable,
graphics card, and display used in the system.
Control/remote — external device (pass-through)
Serial control port input .................. RS-232 via (1) 3.5 mm, 3 pole captive screw connector
Serial control port output ............... 1 set of proprietary signals on a female RJ-45 jack
NOTE: Protocol is mirrored between the transmitter and the receiver.
DVI 201xi Tx • Specifications 15