Extron Electronics DVI 201xi Tx User Guide - Manual (Page 24)

Mounting
This section describes the mounting options for the DVI 201xi Tx
z z
Tabletop Mounting
z z Rack Mounting
z z Under-desk Mounting
Tabletop Mounting
Attach the four provided rubber feet to the bottom of the unit and place it in any
convenient location.
Rack Mounting
Underwriters Laboratories Guidelines for Rack Mounting
The following Underwriters Laboratories (UL) guidelines are relevant to the safe installation
of these products in a rack:
Elevated operating ambient temperature — If the unit is installed in a closed or
multi-unit rack assembly, the operating ambient temperature of the rack environment
may be greater than room ambient temperature. Therefore, install the equipment in an
environment compatible with the maximum ambient temperature (Tma: +122 °F, +45 °C)
specified by Extron.
Reduced air flow — Install the equipment in the rack so that the equipment gets adequate
air flow for safe operation.
Mechanical loading — Mount the equipment in the rack so that uneven mechanical
loading does not create a hazardous condition.
Circuit overloading — Connect the equipment to the supply circuit and consider the
effect that circuit overloading might have on overcurrent protection and supply wiring.
Give appropriate consideration to the equipment nameplate ratings when addressing this
concern.
Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted
equipment. Pay particular attention to supply connections other than direct connections to
the branch circuit (such as the use of power strips).
Rack Mounting the DVI 201xi Tx
The DVI 201xi Tx can be mounted a range of (optional) rack shelves (see Optional
Accessories on page 17). To mount the units, follow the instructions provided with the rack
mounting kit.
Under-desk Mounting
Mount the DVI 201xi Tx under furniture, using the optional Extron MBU 123 under-desk
mounting kit (part #70-212-01). Follow the instructions provided with the kit.
DVI 201xi Tx • Mounting 18