Extron Electronics FOXBOX Tx_Rx DVI Plus User Guide User Manual
Page 42
FOXBOX Tx/Rx • Remote Control
36
6.
Navigate to and select the new firmware file. Click
Open
. The Choose Firmware File
window closes.
NOTE: When downloaded from the Extron website, the firmware is placed in a
subfolder of
C: \Program Files\Extron\Firmware
.
CAUTION: The firmware file must have a .bin extension. Other file types can cause
the unit to stop functioning.
7.
In the Firmware Loader window, click
Begin
(figure 24).
The Total Progress and Progress status bars show the progress of the upload. The
firmware upload to the unit may take several minutes. Once the status bars have
progressed from 0% to 100%, and Status is listed as Completed, the firmware loader
utility resets the unit.
7
Figure 24.
Firmware Loader Screen
8.
Click
Exit
to close the Firmware Loader.