Control tab – Extron Electronics GSS 100 User Guide User Manual
Page 48
Control Tab
Control Page
Click the
Control
tab to access the Control page (see figure 28).
Figure 28.
Control Page
On the Control page, you can set the transition effect (cut or dissolve), mute and unmute
the video, and select the dissolve duration (from 0 to 5 seconds, in 0.1-second increments).
You can also change the slide show settings, such as:
z
z
The duration of each image displayed in the slide show (from 0 to 300 seconds)
z
z
Inclusion of the pass-through input in the slide show
z
z
Auto Switch mode
z
z
Off — Auto-switch on loss of pass-through sync and slide show are disabled.
z
z
Off/show — Auto-switch on loss of pass-through is disabled. Slide show is running.
z
z
On/still — On loss of sync on the pass-through input, auto-switch to display the
last-displayed image until pass-through sync is restored.
z
z
On/show — On loss of sync on the pass-through input, auto-switch to run the slide
show until sync on the pass-through input is restored.
GSS 100 Graphic Still Store • HTML Control and IPL File Manager
42