Installing the ipl file manager, Uploading image files, Installing the ipl file manager and – Extron Electronics GSS 100 User Guide User Manual
Page 51: Uploading images

Installing the IPL File Manager and Uploading Images
You can also upload images using the free Extron IPL File Manager program, designed for
the Extron IP Link family of products. You can download the IP Link File Manager software
from the Extron website,
www.extron.com
.
Installing the IPL File Manager
1.
Log on to the Extron website,
www.extron.com
.
2.
Type
IPL file manager
in the Search box in the upper-right corner
of the web page. Press the keyboard <Enter
>
key.
3.
Click
IP Link
®
File Manager
under the Products header that
appears in the Search Results. The IP Link File Manager web page appears.
4.
Click
Download Now
. The Download Center screen appears.
5.
Enter the information requested on the screen.
6.
Click the
Download IPLinkFileManagerSW
n
x
n
x
n
.exe
button.
7.
On the File Download window that appears, click the
Save
button.
The Save As window opens.
8.
Navigate to the desired location for your file, then click the
Save
button.
The IP Link File Manager is stored on your PC.
9.
To install the IP Link File Manager, double-click the
IPLinkFileManager.exe
file that
you downloaded. Follow the instructions on the installation program windows.
Uploading Image Files
After you have set up the progam for the GSS that is connected to your computer, you can
now upload image files to the GSS. These files can be BMP and JPG files.
Use the IP Link File Manager program to upload files to the GSS as follows:
1.
Click
Start
>
Programs
>
Extron Electronics
>
IPL Tools
>
IP Link File
Manager
>
IPL File Manager
to start the program.
If the Select Startup Mode window (see
on the next page) does not appear,
proceed to step 4:
2.
If the Select Startup Mode window (see figure 31) appears:
And you have not used this program while connected to this GSS before,
proceed to step 3.
And you have used this program while connected to this GSS before, click
Use
Previous Setup
and proceed to step 4.
NOTE: Select the
Never ask again
check box to skip the Select Startup Mode
Window step from now on.
GSS 100 Graphic Still Store • HTML Control and IPL File Manager
45