Extron Electronics GSS 100 User Guide - Manual (Page 9)

Installation
This section details the installation of the GSS 100, including:
z z
Mounting the GSS
z z Rear Panel Connections
Mounting the GSS
CAUTION: Installation and service must be performed by authorized personnel only.
Detailed mounting instructions can be found in the “ Reference Information “
section. The 1U high, half-rack width GSS 100 can be placed on a tabletop,
mounted on a rack shelf , or mounted under or through furniture . Use the applicable
optional hardware:
z z RSU 129 9.5-inch deep universal rack shelf kit (part number 60-190-01)
z z RSB 129 9.5-inch deep basic rack shelf (part number 60-604-02)
z z MBU 125 Under-desk mount kit (part number 70-077-01)
z z MBD 129 Through-desk mount kit (part number 70-077-02)
Rear Panel Connections
All connectors are on the rear panel (see figure 2).
R
R
50/60 Hz
RS-232 LAN
RESET
G
G
B
B
H/HV
H/HV
V
V
100-240V .3A MAX RGB PASS-THRU
OUTPUT
1 4 5 3 6
2
Figure 2. GSS 100 Graphic Still Store Rear Panel
GSS 100 Graphic Still Store • Installation 3