Extron Electronics SCP 250 User Guide - Manual (Page 21)

SCP 250 • Specifications, Part Numbers, Template, Labels A-3
Part Numbers
Included parts
These items are included in each order for an SCP 250:
Included parts Replacement
part number
SCP 250 (black, white) 60-356-02, -03
MR 300 3-gang mounting bracket
(mudring) (black, white)
70-519-32, -33
3.5 mm, 5-pole captive screw connectors 10-319-01LF
Grounding wire
User’s manual
Accessories
Accessories Part number
JB 325 three-gang, 2.5" deep junction box 980083
Cables
This is the type of cable recommended for connecting a system
switcher to one or more SCP control panels:
CTL Series (Comm-Link) cables Part number
CTLP/1000 plenum (1000 feet/300 meters) 22-119-03
CTL/1000 non-plenum
(1000 feet/300 meters)
22-148-03
N These cables are also available in 500 foot (150 m) lengths.
Template
Use the following template (which is NOT full size) as a guide
to mark and cut the hole in the wall or furniture through which
the SCP control panel will be installed. The template includes
the recommended 0.1" (0.25 cm) clearance on all sides of the
optional 3-gang electrical wall box to allow room for the raised
areas surrounding the knockouts. See the installation/operation
chapter for installation details.