Extron Electronics SCP 250 User Guide - Manual (Page 24)

SCP 250 • Specifications, Part Numbers, Template, Labels
Specifications, Part Numbers, Template, Labels
A-6
For information about using the program, you can access a
help file by clicking on the Help menu on the main screen and
choosing Use Help.
The picture below shows how the Button-Label Generator
screen looks when set for the SCP 250.
SCP 250 button label screen
Each input, display, and room control can be labeled with
names, alphanumeric characters, or bitmapped pictures. Each
button’s label can contain from 1 to 3 lines of text (or none).
Each line provides a choice of font sizes and text placement.
Pictures can be selected either from the Device Palette or a
user-supplied graphic file. User-supplied graphics should be
icon (.ICO) or bitmap (.BMP) files. Files called TEST.BMP and
DEMO_BTN.DAT are installed with this program as examples.
Label templates
On the following page is a full-sized template for the labels.
Feel free to photocopy it, write button information in each area
of the blank template as desired, cut the strips out, and insert the
strips in the label window.