Extron Electronics SCP 250 User Guide - Manual (Page 8)

SCP 250 • Introduction
Introduction
1-2
About the SCP 250
The Extron SCP 250 is a hard wired remote control panel for
use with Extron system switchers. Refer to the appropriate
switcher’s user’s manual for information on installing,
operating, and setting up the switcher.
N The system switcher cannot be configured from an SCP
control panel. All switcher setup must be done from the
switcher’s front panel or via RS-232.
The SCP 250 replicates the front panel controls of the
System 7SC switcher (display controls, input selection buttons,
and room function buttons), and it can also be used with the
System 5cr Plus. It accepts signals from the switcher's remote
control, and includes an audio volume control. The SCP 250 can
be mounted in or on a wall or furniture in a 3-gang junction box
(for an installation that meets UL safety standards) or mud ring.
Features
Black or white white faceplates — SCP control panels are
offered in three shades for integration into a variety of
environments.
System expandability — The SCPs can be daisy chained
together in any combination to provide control of a
System 7SC or newer switcher from several locations.
Furniture and wall mountability — The control panels can be
mounted onto or in furniture or walls.
Label windows — Customized labels can be created and
inserted into the windows that are set into the faceplates.