Extron Electronics VN-Matrix 200 Series - Manual (Page 118)

Telnet Interface – Quick Reference
Starting Telnet
1. Click the Windows Start button and click on Run .
In the Open box, type telnet then press the <Enter> key.
The telnet application will start in a separate window:
Login Procedure
1. At the prompt, type open followed by the Ip address of the VN 200 controller and the
telnet port number (9999), then press <Enter>. For example:
open 192.168.0.18 9999 <Enter>
2. At the command prompt, type user admin , then press <Enter>.
3. Then type pass followed by a space and the appropriate password, then press
<Enter>.
NOTE: By default the password is admin, but this can be changed via the web
interface, see “ Changing User Login Passwords ”).
4. Type further commands as required (see “ Serial / Telnet Commands ” for command
options).
5. To logout, type exit followed by <Enter>.
VN-Matrix 200 Series • Technical Data 113