Extron Electronics VN-Matrix 200 Series - Manual (Page 33)

Figure 18. Device — Create Source button
c
Check that the Mode field is set to enable (see the Device Setup Mode on the Help
tab).
TIP: To help identify this device during setup or troubleshooting, check the
Identify box to display the device name on the local monitor (where
connected). See the Device Setup Identify checkbox on the Help tab Ñ.
Figure 19. Device Mode
d
Click the Save All tab.
e
Click the videoPort0 icon. The Configure page will appear.
VN-Matrix 200 Series • System Configuration 28