Extron Electronics VN-Matrix 200 Series - Manual (Page 57)

To Terminate a Remote Control Session Using Hot Keys
Using the keyboard attached to the VN 200 decoder or encoder, press the <Scroll Lock>
key twice, followed by the <F2> key.
Both the source monitor and display monitor will briefly show MK:Local in the top
left-hand corner as shown here.
MK:Local MK:Local MK:Local MK:Local
Mouse and Keyboard Control
1. Login to the web interface (see “ System Configuration ”).
2. From the Device List page click on the required encoder device.
3. From the Device page click the Peripherals tab to display the following:
Figure 39. Peripherals Page
VN-Matrix 200 Series • Remote Keyboard and Mouse Operation 52