NXG Technology NX-RF200 - Manual (Page 4)

Introduction
The NX-RF200 base station is an “addressable” base station.
RF Addressing gives you the ability to control as many as 60 identical
components throughout a house. To enable better range and reliability
the NX-RF200 is equipped with the Narrow Band RF reception (like the
NX-RM610), so is only compatible with other Narrow Band remotes.
NOTE: The NX-RF200 is ONLY compatible with Narrow Band remotes:
the current versions of the NX-RM610 and the NX-RM820 remote
controls.
NX-RF200 Base Station
1
1. NX-RM remote controls send radio
waves in every direction, so your
client enjoys “No More Pointing”
operation!
2. The NX-RF200’s integrated Narrow
Band RF receiver receives commands
from any Narrow Band remote
control.
3. The NX-RF200’s built-in Front
Blaster sends commands to
components in the same cabinet
space as the
NX-RF200.
4. Self-adhesive “Flashers” affix
to the front panels of your client’s
components (over the built-in IR
sensor). The Flashers relay
commands to components out-
of-sight of the NX-RF200’s Front
Blaster. The flashers plug in to the
NX-RF200’s rear flasher line outputs
via their 10 foot cables.
Uniquely, the NX-RF200 can also
connect to rear panel IR Inputs via
its two adjustable Outputs.
NX-RF200_Manual.qxd 10/27/08 12:48 PM Page 4