Elmo Rietschle V-VGD 10/15 User Manual
Page 19
19
www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH
|
Commissioning and decommissioning
6.2 Decommissioning/
storing
Stop the machine
a) Switch the machine off.
b) Falls vorhanden, Absperrorgan in Saug- und
Druckleitung schließen.
c) Disconnect the machine from the electricity
source.
d)
Maschine
druckentlasten:
Rohrleitungen langsam öffnen.
The pressure reduces slowly.
e) Remove the pipes and hoses.
f) Seal the connections for suction and discharge
nozzles with adhesive foil.
see also Section 3.2.1, Page 11
6.3 Re-commissioning
a) Check the condition of the machine (cleanliness,
cabling etc.).
b) Drain the preserving agents.
For installation see Section 5 Page 14
For commissioning see Section 6.1 Page 17