Franklin Fueling Systems TSA Upgrade User Manual
Page 6
6
NOTE: Depending on what software version you downloaded, some software versions referenced below may change.
The latest version of software is always available online at www.franklinfueling.com
anaau-0.9.8.s19 = 4-20ma Module ( both intrinsically safe and explosion proof)
cm-1.4.1.5174.bin = Controller Module
dhiau-0.9.0.s19 = AC Input Module
gioau-0.9.0.s19 = Input/Output Module
plcau-0.9.8.s19 = Display Module
prtau-0.9.3.s19 = Printer Module
pwrau-0.9.8.s19 = Power Supply Module
rlyau-0.9.0.s19 = Relay Module
sn2au-0.9.0.s19 = 2 Wire Sensor Module
sn3au-0.9.0.s19 = 3 Wire Sensor Module
vrmau-0.9.2.s19 = Probe Module
Select the corresponding file and then click recover in the
upper right hand side on the screen next to reboot.
This will recover the module and the run light will stop blinking and return to solid once complete. Recover process per
module will take the same amount of time as an upgrade so be patient and do not stop communication prior to recovering.
If you have questions about this procedure, contact Franklin Fueling Systems Technical Support at 800-984-6266.