ABUS TVVR60021 - Manual (Page 105)

Settings
105
Camera
Camera
TAB analog cameras
Parameter Setting
Camera
no. Shows the camera number
Camera
name Shows the camera name
Status Automatic video signal state detection
Live A preview of the live image can be dis-
played here
Status Channels can be activated or deactivated
here
TAB IP cameras
No. Shows the camera number
Camera address Shows the set IP address of the
camera
Log Selecting the log
Managing the port Setting for http ports of the cam-
era
Channel no. Channel number display
User name Enter the user names of the cam-
era here
Admin password Enter the administrator password
here
Display mode Settings for displaying the camera
name and date
Click on Add to link a camera to the system.
Click on “Search” to search the network for the available
ABUS network cameras. Mark the required cameras and
then click
on “Quick Add” to link the cameras.
Note
In some cases, you need to enter the user names,
password and http port by hand afterwards.
The available bandwidth shows you how much bandwidth
is still available for setting up the network camera.
OSD
Camera Camera to be set
Camera Name Allocation of camera name
Display Name Activate / deactivate display of
camera name in the live view
Display Date Activate / deactivate display of
date in the live view
Display weekday Displays the weekday in the live
cast
Display Week Activate / deactivate display of
week in the live view
Date Format Selection of date display type
Time format Choose between 24-hour and 12-
hour time format for display
Position The position of the text overlay
can be set directly in the preview
image using the mouse. Simply
use the mouse to drag the corre-
sponding text overlay frame.
Time Format 12 hours / 24 hours
Display Mode Settings relating to the presenta-
tion of camera name and date