ABUS TVVR60021 - Manual (Page 106)

Settings
106
Image
Select the camera channel to be p rocessed at “Camera”.
Adapt the camera image to light conditions at “Mode” by
means of specified settings or with user-defined settings.
PTZ
Note
Here you can set up presets and patrols for the
TVIP2xxxx network cameras.
Saving and retrieving presets
1. Use the arrow buttons to move the network cam-
era to the required image section and save the
position, for example as Preset 1
2. Click on Call up to move to Preset 1.
Setting up and calling up patrols
1. Create several presets to use for the patrol
2. Click on + to select a preset
3. Add more presets to set up the required patrol.
4. Then click on the play symbol to start the patrol.
Motion
Selec t the camera channel under “Camera”.
Select the checkbox for motion detection.
The motion detection in the network camera must also be
activated. For further details, refer to the network camera
manual.
Handling
Trigger Channel
Note
You can also start the patrol directly in the live im-
age of the respective network camera.
Note
In order to record using the motion recognition, you
must set the time plan at recording (see p. 109).