ABUS TVVR60021 - Manual (Page 99)

Settings
99
Sender´s
Adresse Corresponding e-mail address for
the e-mail account
Sender´s Re-
ceiver Select three possible recipients for
the e-mail
Receiver Enter the name of the recipient here
Receiver´s
Adresse Enter the e-mail address of the
recipient here
Enable Attached
Picture Tick the box when camera images
should also be sent with the e-mail
as photo files
Interval Select the interval between the
individual recordings (2 to 5 sec-
onds)
1. Enter the parameters of the e-mail notification.
2. Click on Test to send a test e-mail.
3. Please clarify if your settings are correct and you
have received a confirmation mail. Then click on
Apply.
Note
The device sends an e-mail to the specified recip-
ients.
If the e-mail is not received, check the settings
and correct them.
If necessary, check the spam filter of your e-mail
client.
Note
Because of the cause of compatibility please do
only use E-Mail clients where a dial-up via SMTP
is possible.
SNMP
Parameter Setting
Enable SNMP Activate the checkbox to create a
connection to SNMP software
SNMP Version Version of the SNMP system
SNMP Port Enter the SNMP port
(Default: 161)
Read Community Enter the “Key” according to the set-
tings of your SNMP software.
Write Community Enter the “Key” according to the set-
tings of your SNMP software.
Trap Adresse Enter the IP address of the
SNMP manager
Trap Port Enter the trap port
(Default: 162)
UPnP
Parameter Setting
Activate UPnP Activates the automatic UPnP port
forwarding in the router
Allocation type The port allocation for port forwarding
can be assigned automatically or
manually.
Port type Server port: General communication
port
HTTP port: Port for the HTTP proto-
col
RTSP port: Port for the RTSP proto-
col
HTTPS: Port for a secure HTTP pro-
tocol connection
Edit Activates editing for the external port
External port Port for accessing the corresponding
service on the external router side
Allocate IP
address Internal IP address of the DVR
Port Internal port for the corresponding
service in the DVR
Status Activity status or the corresponding
port forwarding