ABUS TVHD60010 User Manual
Page 28
28
6.4 Power supply
Before starting installation, ensure that the power supply system voltage and the rated voltage of
the camera are identical.
TVHD60000
(1)
Video signal output (HD-SDI)
(2)
Power supply, 12 V DC
The cameras require a 12 V DC power supply. Ensure correct polarity when connecting them.
A plug-in power supply unit (DC connector, 5.5 mm x 2.1 mm) is provided for the connection.
6.5 Connecting the video cable
In order to transmit the video signal from the HD-SDI camera to an HD-SDI converter, monitor or
recorder, an RG6 or RG59 coaxial cable with a BNC plug (male) must be connected to the video
output. The cable length to the next device may not exceed 80 meters (RG59) or 150 meters (RG6).
To increase the range, you can install suitable signal HD-SDI repeaters.
1
2