ABUS TVHD60010 - Manual (Page 34)

34
WHITE BALANCE
Function Description
White balance settings
AWB:
Auto White Balance
White balance calculations are dynamically and
continuously performed in the 2700~9500K range.
ATW:
Auto White Balance
White balance calculations are dynamically and
continuously performed in the 1800~10500K range.
PTL:
Push-To-Lock
White balance is performed after pressing the “Enter”
button on the back of the camera and the value is
stored permanently.
ENHANCE
Function Description
AGC Automatic Gain Control (0~20)
The higher the value, the higher the maximum gain value. The
image performance in low-light conditions is improved but image
noise may be increased.
GAMMA Gamma value (0~3)
Adjustment of the gray scale to the display device.
SHARPNESS Sharpness value (0~15)
A higher value increases sharpness but also increases image
noise.
WDR Wide Dynamic Range function
Function for improving image quality when subject to extreme
image contrasts (WDR – Wide Dynamic Range). Image noise is
increased when activated.
OFF: Function deactivated
ON: Function activated
DNR, dynamic noise
reduction Digital Noise Reduction (DNR) (0~15)
Digital noise reduction is automatically activated when picture
brightness is low. A higher value can reduce image noise. Image
sharpness is reduced when the DNR value is increased.
BRIGHTNESS Picture brightness setting (0~15)
CONTRAST Picture contrast setting (0~15)
COLOR
SATURATION Picture color saturation (0~15)