ABUS TVHD60010 - Manual (Page 37)

37
RESTORE DEFAULT
Function Description
RESTORE
DEFAULT Restore settings
Select this function to reset the camera parameters to factory settings.
Important: All previous settings will be lost!
YES: Restoring the settings Confirm reset with “ENTER” on the back of
the camera.
NO: Cancel restore settings.
8. Maintenance and cleaning
9.1 Function test
Examine the technical safety of the product regularly, e.g. check the housing for damage.
If it seems that safe operation is no longer possible, stop operation of the product and safeguard it
against accidental use.
It is likely that safe operation is no longer possible in the event that:
 The device shows visible damage.
 The device no longer works correctly.
 The device has been stored in adverse conditions for a long period of time.
 The device has been subjected to stress during transportation.
Please note:
You do not need to perform maintenance on this product. There are no components to
service or anything inside the product to check. Never open it.
9.2 Cleaning
Clean the device with a clean, dry cloth. The cloth can be dampened with lukewarm water if there is
stubborn dirt on the monitor.
Make sure that no liquids enter the inside of the device, which would destroy the device.
Do not use any chemical cleaning agents, which could impair the surface of the housing.
9. Disposal
Devices displaying this symbol may not be disposed of with domestic waste. At the
end of its service life, dispose of the product according to the applicable legal
requirements.
Please contact your dealer or dispose of the products at the local collection point
for electronic waste.