ABUS TVIP515x0 User Manual
Page 119
119
English
The settings can be tested using the “Test” button. Accept the settings by
pressing “OK” or cancel them by pressing “Cancel”.
Alarm sending
Alarm sending:
Activates or deactivates the transmission of image data to an e-mail address
over an SMTP server.
File attachment:
Specify whether the e-mail should have an attached file here (image data).
Image file name:
Specify the file name for the image/video file here.
Suffix:
Select the file suffix here. This can be the date and time or a sequence
number.
Delete sequence number:
Resets the sequence number to 1.
Alarm:
In the event of an alarm, certain reactions can be configured for SMTP
transmission here. A button for configuring the corresponding alarm detector is
available for each entry (if configuration of the detector or trigger is possible).
Effective Period:
Always:
The detectors for these alarms are permanently activated.
Schedule:
The detectors for these alarms are activated at defined schedules. Press the
“Schedule” button to configure these settings (see also the “Schedule” section).
Accept the settings by pressing “OK” or cancel them by pressing “Cancel”.
Periodical sending
Periodical sending:
Image file name:
Specify the file name for the image/video file here.
Suffix:
Select the file suffix here. This can be the date and time or a sequence number (or no
suffix).
Interval:
Specify the sending interval here. The minimum interval period is 30 minutes.
Effective Period:
Always:
The detectors for these alarms are permanently activated.
Schedule:
The detectors for these alarms are activated at defined schedules. Press the
“Schedule” button to configure these settings (see also the “Schedule” section).