Aeromotive 17157 - COBRA JET BACK HALF FUEL SYSTEM User Manual

Page 3

Advertising
background image


Figure 1-3

1-9. Install one of the supplied 15610 fittings into the outlet of fuel pump (Make sure the fitting has the AN-10 o-ring

installed on it).


1-10. Assembly two hoses, both with 90-degree hose end on all ends. One will be used for the pump outlet and the other

will be used for the return, figure 1-4.

Figure 1-4

1-11. After connecting the return and pump outlet lines to the bulk heads, move to the under side of the vehicle.

1-12. Find a suitable place for the fuel filter (12321) and mounting bracket (12305). Typical mounting location on

passenger side frame rail, figure 1-5.

Advertising
See also other documents in the category Aeromotive For the car: