Aeromotive 17158 - COBRA JET COMPLETE FUEL SYSTEM User Manual

Page 10

Advertising
background image


34. With the supplied vacuum tee, tee into the manifold vacuum/pressure port (located under the blower drive snout) and

route vacuum line to the regulator.


35. Use the supplied hose clams to position the hoses neatly where you would like them.

36. Remove the 1/8” port plug from the face of the regulator so the fuel sample valve can be placed there. Use thread

sealant on the threads as they are NPT. Place a fuel pressure gauge on the fuel sample valve so pressure can be set.


37. Reverse steps 1-10 for reassembly.



Advertising
See also other documents in the category Aeromotive For the car: