Alpha Technologies PME Series - Manual (Page 43)

43 031-161-B0-006, Rev. F
2.0 Installation, continued
2.5 Battery Installation, continued
2.5.5 Battery Wiring Diagrams, continued
Fig. 2-29, PWE-6 Battery Wiring Diagram (without BIT)
Upper Tray
Lower Tray
Battery Cable Connector
(to XM2 Power Supply)
Black (-)
Red (+)
Temperature Probe
(Connected to XM2)
RTS
(Taped to side of battery)
In-line Fuse (optional)
In-line Fuse (optional)
1A
2A 3A
1B
2B 3B
R E D (+)R
E
D
(
+
)
B L A C K (-)B
L
A
C
K
(
-)
Zip-tie together
CAUTION!
If using the optional slide tray, zip-tie the negative black wire to the center battery interconnection
cable. This will prevent the wire interfering with slide tray closure.
Zip-tie to
enclosure fl ange
Zip-tie to
enclosure fl ange