American Expedition Vehicles 3.5— 4.5 Dualsport suspension - Manual (Page 9)

7
8.
Note: On Rubicon models, remove the “fi r tree” zip ties holding the speed sensor wiring to the frame and
upper control arm.
A. Remove and save all anti-sway bar link hardware. Note orientation, new links will be installed in the
same way
B. Remove shocks and save all shock mounting hardware.
C. Lower axle and remove springs. DO NOT remove factory isolator.
D. For 2011 and newer models, remove and discard factory bracket from the brake line.
A.
A.
D.