Atec Agilent-E4916A - Manual (Page 5)

5
Sample Programs for Versatile Needs
HP VEE Control Program
The control program is available as
standard with the HP E4916A. This
program runs on the HP VEE and
ensures easy evaluation of crystal
resonator performance. (The instru-
ment driver is not provided: this
program controls the HP E4916A via
direct I/O.)
This program allows you to:
• obtain the best possible results
during acceptance and quality
assurance inspection,
• control the HP E4916A operation
on the PC,
• graphically display the drive level
characteristics, and
• save measurement data in the
ASCII format.
This program is supplied with the run-
only versions of VEE3.21 (Windows
95). (This program does not run on
VEE4.0.)
HP BASIC Sample Programs
HP BASIC sample programs are
available as standard with the
HP E4916A for efficient crystal
resonator testing on production lines.
These sample programs allow you to:
• control the operation of two or
more HP E4916As on a single PC,
• automatically document your
measurement results and send it to
a printer,
• save data in a format that can be
loaded into a spreadsheet program
such as Microsoft Excel, and Lotus
1-2-3.
• save and recall multiple patterns of
the system settings together with
calibration data on the PC.
System Requirements (Recom-
mended)
• Processor: Pentium 90 MHz or
higher
• Memory: 32 MB or more
• Disk space: 20 MB or more
• HP-IB interface (82335B, 82340,
82341C or D)
Creating a documentation using HP
BASIC sample program
Option 001: Add Impedance
Probe Kit
This kit allows you to
• apply up to 20 mW to the DUT
(resonator) when used in place of
the π network test fixture,
• use the HP E4916A as a powerful
LCR meter when the option 010
(LCR measurement feature) is
used, and
• vuse a variety of test fixtures for
HP 4291A Impedance Analyzer (the
HP 16099A is required).
(See the accessory guide for more
information on the text fixtures that
can be used in combination with the
16099A.)
Outline of Options 001 and 010
Measurement parameters: Z, Y, θ ,
R, X, G, B, L, C, D, Q
Measurement range: 0.2 to 10 k Ω
DC bias: ± 30V max. (an external
power supply is required)