Atec EM-Test-Netwave-1-Phase Series - Manual (Page 4)

DATA SHEET > NetWave Series 1-phase > 20130304
TECHNICAL DETAILS
OPTIONS
OPTIONAL ACCESSORIES (FOR NETWAVE 7 ONLY)
MT-NetWave Three-phase matching transformer,
input voltage 3x200V,
output voltage 3x400V,
in separate cubicle
IT-NetWave Three-phase isolation transformer,
input voltage 3x200 or 3x400V,
output voltage 3x400V,
with 25HU rack (with space to also
house a DPA 500N).
This option is required to use the
NetWave 7 for aircraft and MIL
standard testing.
OPTIONAL SOFTWARE FOR MODELS NETWAVE 7.X
NWLicense 1 Software license for DO-160
standard
(only for models NetWave 7.2/7.3)
NWLicense 2 Software license for MIL-STD-704
standard
(only for models NetWave 7.2/7.3)
NWLicense 3 Software license for AIRBUS
standards
(only for models NetWave 7.2/7.3)
NWLicense 4 Software license for analysis
functions as min., max., average and
...,
power and harmonic measurement,
(requires the option "NWBoard")
NWLicense 5 Software license for BOEING
standards
(only for models NetWave 7.2/7.3)
OPTIONS (ALL MODELS)
NW-BOARD MEASURING MODULE
Voltage 25V, 50V, 100V, 250V and 500V,
unipolar or bipolar
Current 7A, 15A, 30A, 70A and 150A,
unipolar or bipolar
Resolution 16 Bit
Accuracy Voltage: better than 0.2%
Current: better than 0.5%
Frequency range DC - 50kHz
Sample rate 5Hz - 100kHz, selectable
Memory Min. 40GB on hard disk,
File size max. 1GB
OTHER SOLUTIONS
OTHER MODELS
NetWave Series
(3-phase) Three-phase Multifunction AC/DC
power sources, up to 60,000VA AC
and 72,000W DC
OTHER EQUIPMENT
DPA 500N 1-phase Harmonics and Flicker
analyzer with built-in Flicker
impedance
www.emtest.com © EM TEST > PAGE 4/5