Atec Noiseken-ESS-200AX - Manual (Page 2)

Your products may
have passed the test
standards, but can
they survive in the real
world?
There are many ESD
standards for your
equipment.
Do those standards
really represent
the real world
phenomenon?
Reconsider your
testing program to
assure that your
products are really
ESD-immune.
Consider NoiseKen's
ESS series ESD
simulators to ensure
your products survival
in the real world.
The issue of product-level ESD (electrostatic discharge)
immunity has been attracting continued interest because it is
an important quality factor in equipment reliability, durability
and sometime safety.
Generally, among the causes of equipment malfunction,
problems caused by ESD are the most diffi cult events against
which to incorporate protective measures, since the causal
relation generally cannot be found easily. This often
makes ESD test programs extensive, complex, burdensome
and time-consuming. Thanks to the following benefi ts,
NoiseKen's ESS series ESD simulators are your best choice
whatever your requirements are for design, qualifi cation,
production or diagnostic tests.
Meet and far exceed the requirements in
EN/IEC61000-4-2 and ISO10605
Up to 30kV output in both contact and air
discharges
A light weight discharge gun
Easily changeable capacitor and resistor units
A wide range of options
CE marked
Two models ESS-2002EX and ESS-2000AX are available.The
above-mentioned capabilities are common to them.
The ESS-2002EX is the basic model with a built-in discharge
counter and time controller.
The ESS-2000AX is the fully programmable menu-driven
simulator enabling users to carry out tests in more automated
manner.
●
●
●
●
●
●