Atec Noiseken-ESS-200AX - Manual (Page 6)

Electrostatic Discharge Simulator
4
ESD Simulator Options
OPTIONAL ACCESSORIES FOR ESS-2000AX
■
Automatic ESD Eliminator
MODEL: 01-00013A •
Connected to the ESS-2000AX simulator main
unit, the Automatic ESD Eliminator automatically
removes residual charges on the EUT. A control
signal from the ESS-2000AX turns on the switch of
the eliminator to drain away the residual charges
to the ground. Two operation modes are provided:
turn-on after each discharge and turn-on after
preset number of discharges (Not compliant with
the standard).
Gun Holder
Model 03-00056A • Warning Lamp
Model 11-00014A •
A gun holder that can be screwed
to the left side of ESS-2000AX.
AUX connector junction box
Model 05-00052A •
Warning Lamp and Automatic
ESD Eliminator options and
external trigger circuit can be
simultaneously connected.
Optical USB module
Model 07-00022A • Optical RS232 module
Model 07-00017A •
Optical conversion adapter to
be free from the EM interference
when communicating with PC
Optical conversion adapter to
be free from the EM interference
when communicating with PC