Avision AM7100NF User Manual - Manual (Page 87)

80
Using Background Removal
1. Place your document either on the flatbed glass or into the ADF input tray.
2. Press the Menu button on the control panel. The LCD-display shows the
following Menu screen.
Menu/to select
Press WX, Num
3. Press the Set, the Left-arrow or the Right-arrow button. The LCD shows
“1. Common Setup”.
1. Common Setup
Press WX, Set
4. Press the Left-arrow or the Right-arrow button repeatedly until “Copy
Setup” is displayed.
14. Output Mode
Press WX, Set
5. Press the Set button and then the Left-arrow or the Right-arrow button
until “24. BG Removal” is displayed.
24. BG Removal
Press WX, Set
6. Press the Set button and then the Left-arrow or the Right-arrow button
until “Text Mode” is displayed.
Text Mode
Press WX, Set
7. Press the Set button and then Left-arrow or the Right-arrow button until
“ON” is displayed.
ON
Press WX, Set