B&K Precision 830C - Manual - Manual (Page 98)

96
:LIMit
:MODE <mode> Set the value of the
limit function
:UPPer <mode>,<value>
:LOWer <mode>,<value>
:MODE? Query the value of
the limit function
:UPPer? <mode>
:LOWer?
:STATe <Boolean> Enable/disable the
limit function
:TOLerance
:RANGe <1 | 5 | 10 | 20> Set the value of the
Tolerance function
:BASE? Query the value of
the Tolerance base
:VALue? Query the
tolerance value
:STATe <Boolean> Enable/disable the
tolerance function
TRIGger
:SOURce? Query the trigger
source type
:SOURce <BUS | IMM> Select a trigger
source
FETCh? Returns a data any
time that the last
reading is valid.
SYSTem
:AOFF:TIME <minute>:0~99 Set an auto power
off time
:BLIT <Boolean> Enable or disable
the backlit
:TIME <second>:0~99 Set a backlit time
:BEEP <Boolean> Enable or disable
the buzzer.