B&K Precision 8500-8526 - Manual - Manual (Page 52)

Command Group Byte Action
List operations
0x3A Select the list operation (CC/CV/CW/CR)
0x3B Read the list operation (CC/CV/CW/CR)
0x3C Set how lists repeat (ONCE or REPEAT)
0x3D Read how lists repeat
0x3E Set the number of list steps
0x3F Read the number of list steps
0x40 Set one of the step's current and time values
0x41 Read one of the step's current and time values
0x42 Set one of the step's voltage and time values
0x43 Read one of the step's voltage and time values
0x44 Set one of the step's power and time values
0x45 Read one of the step's power and time values
0x46 Set one of the step's resistance and time values
0x47 Read one of the step's resistance and time values
0x48 Set the list file name
0x49 Read the list file name
0x4A Set the memory partitioning for storing lists
0x4B Read the memory partitioning for storing list steps
0x4C Store the list file
0x4D Recall the list file
Battery testing
0x4E Set minimum voltage in battery testing
0x4F Read minimum voltage in battery testing
LOAD ON
0x50 Set timer value of for LOAD ON
0x51 Read timer value for LOAD ON
0x52 Disable/enable timer for LOAD ON
0x53 Read timer state for LOAD ON
Address 0x54 Set communication address
LOCAL 0x55 Enable/disable LOCAL control
Remote sensing
0x56 Enable/disable remote sensing
0x57 Read the state of remote sensing
Triggering
0x58 Select trigger source
0x59 Read trigger source
0x5A Trigger the electronic load
Store/Recall 0x5B Store DC Load's settings
8500 DC Load Series Version: 030614 Page 52 of 77