7 q calibrate functions – MoTeC M1 Tune User Manual User Manual
Page 52
User Manual
USING M1 TUNE
Printed documents are not controlled
Page 51
11.7
Q CALIBRATE FUNCTIONS
The
Q
key performs special functions on parameters and tables that were not available in older
ECUs. The function is different depending on the selected item.
Note: The
Q
function can now perform a calibrate against any parameter or table
displaying the
Q
icon.
For example
When the item is selected, and the
Q
key pressed, M1 Tune performs a special function that will
generally calibrate that value.
An example of this is setting throttle position high and low values. The process for this would be
as follows:
1. Select the
Throttle Pedal Main Closed
parameter.
2. Close the throttle and press the
Q
key.
►
The current pin voltage is determined and
Throttle Pedal Main Closed
parameter is set to
that value.